FAQ

A broadband internet connection
A wireless access point (WI-FI) connected to your brandband internet, preferably via a wirless router

Yes can record subtitles

SBS has performed an upgrade to their digital network. Please see the attached press release. You need to rescan your unit in order to receive SBS transmissions.

Approximately 2 hours playback time on a full charge battery - At least 8 hours of charging time.

Standby power - 4W.

Takes 3 AA batteries.

Plug the antenna cable from the wall into the RF In socket at the back of your set top box. The antenna cable is what you would have previously had plugged straight into the back of your TV before you purchased the set top box.
Then using the lead with three different colours (red, white, yellow) that was supplied with the set top box plug the white cable into the socket at the back of your set top box that has "L" below it. Plug the red cable into the socket at the back of your set top box that has "R" below it - These are your audio sockets. Plug the yellow cable into the socket at the back of your set top box that has "Video" below it.
The other end of these cables will then need to be plugged in to your television. Your TV should have coloured sockets matching the cables, and may be labeled as the following: "Audio In" - "R" (for the red cable) "L" (for the white cable) and "Video In" for the yellow cable.
Once all of the cables are connected, you can then plug in the power cable to the set top box. Press the "TV/AV" or "Source" button on your TV to locate the channel that the set top box is being broadcast through. You will then enter the set up menu as per your instruction booklet.

Does your VCR have audio in and video in sockets at the back of it? If it does, plug the red, white and yellow cables from your Set Top Box - composite (L sound and R sound) and video out sockets into the back of the VCR. Make sure that the antenna is plugged from the wall into the RF In socket on your set top box. You will then be able to plug the three cables that are currently connected from your VCR to your TV in, and you will have digital TV through your VCR.
Alternatively, if you have no audio or video in sockets on the back of your VCR, you will need to use the RF Loop Through function on your Set Top Box. You will need to plug the antenna from the wall into the back of your set top box. You will then need to plug the red, white and yellow cables (composite - L sound and R sound and video out sockets) from your set top box your into the back of your TV. You will then need to purchase another antenna cord (female to male), and plug this from the RF loop through socket in the back of your set top box into the VCR.
You can then connect your VCR as per above.

Unfortunately no set top box available at the moment will be able to broadcast the DAB+ radio transmissions that begin on May 1, 2009. This is due to the fact that a separate module is required in order to receive digital radio.
Grundig will have a variety of DAB+ products available when the new technology is launched - keep an eye on the website for more information.

You are receiving this message because the unit, which is a standard definition digital PVR, has located the high definition digital channels, but is unable to display them due to their HD format.
I suggest that you change the channels using the remote control, and the standard definition channels will be displayed.

Please note that 5 amps are drawn when the GLCD1506HDV is operated via 12 Volts.

Unfortunately the Ovation is only able to receive AM stations as high as the 1620AM frequency. No adjustments that may be made to this unit.

All Grundig products have a 1 year warranty, whilst all LCD TV's are covered by a 3 year warranty.

The 32” Misuro HD is not a Full HD panel (1080p), however it is a high definition panel.
Your Blue Ray player may be connected to the unit via one of the two HDMI inputs on the rear of the unit.

The GPVR1250 is a standard definition PVR. As such, it only receives the standard definition digital channels, and not the additional high definition digital channels.

The pin number is "6666"

Please refer to the attached file which outlines how to connect your GPVR1250 (or other digital set top box devices) to your VCR.

Yes the GLCD1904WDVD is wall mountable

Unfortunately this unit is not compatible with a universal remote.

To turn off the lock function, press the LCD Menu button on your remote control to display the OSD menu. Then press the arrow buttons on your remote to select the Lock menu. Once selected the lock menu, press the down arrow to turn off the Lock function. If asked for a password at anytime during this process enter the default password (0000) or the set password.

When this unit is being charged via the solar panel, if its battery is under 30% capacity, the unit will charge but the charging icon will not be displayed in order to conserve power. When the battery is above 30% capacity and charged via solar panel, the charging icon will be displayed.